Cannon DIGI-TROLL 10 TS Bedienungshandbuch PDF herunterladen (Seite 12)

www.cannondownriggers.com

Installation

ATTACHING THE ROD HOLDER(S)

The locking rod holder(s) incorporate a locking tooth

design which can be easily adjusted every 15° with the

soft grip knob. The symmetrical design will allow mount-

ing of the rod holder on either side of the downrigger or

two rod holders at the same time. The unique two piece

design allows independent adjustment of the rod holder

and the rod holder arm in two axes.

(Figure 17)

Caution: This rod holder is intended for use of up to

30 lb. test line only and is not recommended for use

with any tackle IGFA

(International Game Fish Association)

rated higher than 30 lb. A safety strap (not included) is

recommended for all applications.

NOTE: The rod holder assembly is not covered

under warranty when used with tackle above 30 lbs.

Equipment placed in the rod holders and the loss

thereof is the responsibility of the user and is in no

way warranted by Johnson Outdoors, Inc. Mounting

must be in accordance with the above instructions

and pictures to comply with the product warranty.

To install the rod holder(s):

1) Fasten rod holder to rod holder elbow using supplied

spring and knob.

2 ) Attach the rod holder to the downrigger on either side

using the supplied spring and knob. (Figure 19)

3) Repeat the above steps for the other side if (2) rod

holders are to be mounted.

The rod holders can be adjusted by loosening either

knob until the locking teeth are free from each other.

Rotate the rod holder or arm to the desired position and

re-tighten knob.

REPLACING THE CLUTCH PAD

To replace the clutch pad, follow the steps for removing

the spool. Once the spool is removed, you have access

to the clutch pad. (Figure 16) Simply pull it off the shaft

and replace. Reassemble the spool and cover in the

reverse order.

FIGURE 16

FIGURE 17

FIGURE 18

FIGURE 19

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Cannon DIGI-TROLL 10 TS Bedienungshandbuch Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Cannon DIGI-TROLL 10 TS