Cannon DIGI-TROLL 10 TS Bedienungshandbuch PDF herunterladen (Seite 13)

www.cannondownriggers.com

Installation

TERMINATING THE DOWNRIGGER CABLE

TIP: Use only straight cable when routing thru the terminator. Worn or kinked cable can be stressed

and may break prematurely when retrieving trolling weights.

ATTACHING THE LINE RELEASE (UNI-RELEASE)

The Cannon Uni-Release attaches directly to the down-

rigger weight. Attach ﬁ shing line to the clip at the end of

the release, and then click through a series of increas-

ing tension settings. The release can be used with any

test line on salt or fresh water and may be adjusted from

2 to 22 pounds of grip tension on the line.

To change line release tension, turn tension knob to (+)

to increase or (-) to decrease. Tension also may vary

according to where the line is placed in the grips. Higher

tension is on the line if it is set back toward the hinge,

and lower if set closer to the opening. To open the re-

lease, spread the release arms with thumb and foreﬁ n-

ger applying pressure to the sides.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Keine Kommentare

Cannon DIGI-TROLL 10 TS Bedienungshandbuch Seite 13