Cannon DIGI-TROLL 10 TS Bedienungshandbuch PDF herunterladen (Seite 22)

www.cannondownriggers.com

Bottom Track Menu

From the depth screen, press the menu key once. The screen shows the user-set depth limit that the weight will travel

to regardless of the bottom depth. Press the UP key to increase and DOWN key to decrease. Caution: For obvious

reasons, this limit must not exceed the bottom depth and/or the length of the cable. Complete running out of the cable

will result in back spooling or loss of cable.

Now press the RUN key to activate the Bottom Following feature or press Select key to adjust the distance that the

weight is to remain off the bottom. The range is from +50 to -50 feet. Use the negative range to compensate for the

Blowback of the weight at high trolling speeds. Press the UP or DOWN key to increase or decrease the value and

press RUN key to activate the Bottom Track or press Select key once more to adjust the sensitivity of the weight

depth adjustment to minor variations in depth and/or motion of the boat due to wave action. Use UP or DOWN key to

adjust. The range is 1 to 16 feet. For relatively calm water, start with a setting of 4 feet. The weight will now adjust its

depth only when the bottom depth increases by 4 feet or more. However, it will always adjust for any decrease in bot-

tom depth regardless of this setting.

The Menu System

The chart below summarizes the Digi-troll 10’s menu system in the order of occurrence.

While programming, the UP key is used to increase the value and the DOWN key is used to

decrease the value. Remember during programming, if there is no activity on the keypad for 7 seconds, the menu

reverts back to the default depth screen.

NOTE: The Cycling, Speeds, Line On Reel, and PIC menu options are NOT accessible through the downrigger when

connected to Cannonlink.

Bottom Track

The Bottom Track mode is designed to help you ﬁ sh consistently

near the bottom. This mode of operation requires one of the following:

1) Connection to Cannonlink and a compatible Humminbird ﬁ shﬁ nder (only settable at ﬁ shﬁ nder).

2) Optional sonar transducer attached to your downrigger and mounted according to the instructions in this man-

ual.

In the bottom track mode, the Digi-troll 10 maintains the weight at a ﬁ xed distance above the bottom. In order

to avoid continuous weight adjustments due to minor changes in bottom depth and boat motion caused by wave ac-

tion, you have the ability to adjust the responsiveness of the weight. You can also deﬁ ne the maximum depth that you

wish the weight to go to, regardless of the bottom depth.

Caution:

In order to keep the weight from touching the bottom, make sure that the bottom is well below the band that

you have selected.

Getting Started

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Keine Kommentare

Cannon DIGI-TROLL 10 TS Bedienungshandbuch Seite 22